Please note PING now requires a serial number for replacement I E1 irons to match your existing set of irons.
Features:
Features:
- 431 STAINLESS STEEL HEAD - Provides softer feel and its higher strength-to-weight ratio allows for more perimeter weighting to increase forgiveness and accuracy.
- CONCEALED CUSTOM TUNING PORT - Positioned deeper in cavity and lower on face to align with impact area for a more solid sound and feel.
- PROGRESSIVE SET DESIGN - Head sizes and offsets are engineered to provide forgiveness and trajectory control.
- DISTANCE-GENERATING LENGTHS & LOFTS - Lengths and lofts are optimized to increase distance with proper gapping and promote higher trajectories for stopping power.
- (3-9 irons +1/4" length vs. i25 irons)
- (3-8 irons 1° stronger loft vs. i25 irons)
- HIGH MOMENT-OF-INERTIA (MOI) - Weight savings (3-4 grams) from the 431 stainless steel and the deeper CTP position allow for expanded perimeter weighting. Tungsten toe weight in 3 - 7 irons increases forgiveness.
- Available in Men's
- Available in Hand: Right & Left
- Available in Individual Irons: 3, 4, 5, 6, 7, 8, 9, PW, UW
- Serial # Required: Enter the serial number from an existing set to add or replace a club
- Shaft, Lie, Length, and Grip will be determined by the serial number of your club. If custom options are requested, please leave a note in the order under the "Customize Me" button.
- PING Lie Options:
- Maroon - 5° upright
- Silver - 4° upright
- White - 3° upright
- Green - 2° upright
- Blue - 1° upright
- Black - Standard
- Red - 1° flat
- Orange - 2° flat
- Brown - 3° flat
- Gold - 4° flat
- PING Grip Options:
- Orange = +1/16"
- Gold = +1/32"
- White = Standard
- Aqua = -1/64"
- Red = -1/32"
- Blue = -1/16"
| Club | Length | Loft | Lie | Offset | Bounce | Swing Wt. | Flex | Hand |
| 3 | 39" | 20° | - | 0.21" | 4° | D1 | SR,R,S,X | RH/LH |
| 4 | 38.5" | 23° | - | 0.19" | 5° | D1 | SR,R,S,X | RH/LH |
| 5 | 38" | 26° | - | 0.17" | 6° | D1 | SR,R,S,X | RH/LH |
| 6 | 37.5" | 29° | - | 0.14" | 7° | D1 | SR,R,S,X | RH/LH |
| 7 | 37" | 32° | - | 0.09" | 8° | D1 | SR,R,S,X | RH/LH |
| 8 | 36.5" | 36° | - | 0.07" | 9° | D1 | SR,R,S,X | RH/LH |
| 9 | 36" | 41° | - | 0.05" | 11° | D1 | SR,R,S,X | RH/LH |
| PW | 35.5" | 45° | - | 0.03" | 12° | D2 | SR,R,S,X | RH/LH |
| UW | 35.5" | 50° | - | 0.03" | 13° | D2 | SR,R,S,X | RH/LH |
These are design specifications that may vary due to manufacturing tolerances.
Lie angle based on Blue Color Code in standard-length CFS Distance steel shaft.
Lie angle based on Blue Color Code in standard-length CFS Distance steel shaft.
-
Ping I Iron
Service was great. Staff was very knowledgeable.
